Loading ...
Loading ...
Loading ...
User Manual\11
— To open the dispenser, turn the cap to the "open" arrow, anti-clockwise, and
lift out. (1)
— Pour the rinse aid into the dispenser, being careful not to overfill. (2)
— Replace the cap by inserting it aligned with the "open" arrow and turn
clockwise. (3)
Warning! Be careful not to overfill the dispenser and wipe up any
excess spilt with a damp cloth. Any residual rinse aid can
cause excess foaming during the next wash.
Adjusting the rinse aid dispenser The rinse aid dispenser has six or four settings. Always start with the
dispenser set on "4". If spots and poor drying are a problem, increase the
amount of rinse aid dispensed by removing the dispenser lid and rotating
the dial to "5". If the dishes are still not drying properly or are showing spots,
adjust the dial to the next higher lever until your dishes are spot-free. The
recommended setting is "4". (Factory value is "4".)
— Increase the dose of rinse aid if there are drops of water or lime spots on
the dishes after washing. Reduce it if there are sticky whitish stains on your
dishes or a film on your glassware or cutlery.
\Operating Your Dishwasher\
Loading ...
Loading ...
Loading ...