Loading ...
Loading ...
Loading ...
Unpacking and Checking Contents
Tools Needed
Tools required for assembly and alignment:
• #2 Phillips screwdriver
• Adjustable wrench.
• Combination Square
#2 Phillips Screwdriver
6" Adjustable Wrench
Combination Square
Combination Square Must be True
Straight Edge of
Draw Light Board 3/4" Thick
Line on Board This Edge Must be
AI°iill il i_ieiieltlw i ii rl iiilr e
is Flipped Over in Dotted Position
Unpacking
WARNING: To avoid injury from unexpected start-
ing or electrical shock, do not plug the saw in until
all assembly and alignment steps are complete.
The power cord must remain unplugged whenever
you are working on the saw.
Unpacking and Checking Contents
1. Separate all "loose parts" from packaging materials
and check each item with "Table of Loose Parts" to
make sure all items are accounted for, before discard-
ing any packing material.
WARNING: If any parts are missing, do not attempt
to assemble the band saw, plug in the power cord,
or turn the switch on until the missing parts are
obtained and are installed correctly.
2. Sometimes small parts get lost in packaging materials.
Do not throw away any packaging untilyour saw is put
together. If you are missing a part, check packaging
before contacting Sears.
7
Loading ...
Loading ...
Loading ...