Simpson SIMPSON User Manual

Loading ...

18- ENG

2. After adding a gasoline stabilizer, run the engine outdoors for 10 minutes

to be sure that treated gasoline has replaced the untreated gasoline in

thecarburetor.

NOTICE: Risk of property damage. Never run your pressure washer without an

adequate watersupply.

PUMP

The manufacturer recommends using SIMPSON

/ POWERWASHER

Pump

Guard or equivalent when storing the unit for more than 30 days and/or when

freezing temperatures are expected. SIMPSON

/ POWERWASHER

Pump Guard

is environmentallyfriendly.

NOTE: Using pump guard helps provide proper lubrication to the internal seals of

the pump regardless of temperature orenvironment.

NOTICE: Risk of property damage. Use only SIMPSON

/ POWERWASHER

Pump Guard or equivalent. Other products could be corrosive and/or contain alco-

hol which may cause pumpdamage.

PRESSURE WASHER (FIG. 13)

1. Drain all water from high pressure hose and wrap it onto hosewrap.

2. Drain all water from the spray gun and wand by holding spray gun in a

vertical position with nozzle end pointing down and squeezing trigger. Store in

gunholder.

3. Fold handles into the storage position, if needed. Place one hand firmly on the

handle (G), place the other hand on the knob (N) on the right side of the handle.

With fingers on the knob on the right side of the handle, carefully pull knob (N)

back and gently push the handle downward until fully locked inplace.

FIG. 13

ACCESSORIES

DANGER: Risk of fluid injection. When using replacement spray wands

or guns with this pressure washer, DO NOT use a spray wand and/or spray

gun/wand combination that is shorter in length than what was provided with

this pressure washer as measured from the nozzle end of the wand to the

guntrigger.

NOTICE: The use of any other accessory not recommended for use with this tool

could be hazardous. Use only accessories rated equal to or greater than the rating

of the pressurewasher.

Loading ...

Simpson SIMPSON