Loading ...
Loading ...
Loading ...
6
1886
Installing the Canopy
2 of 3
Canopy
Screws
BAG
1 of 3
Canopy
Screws
BAG
Swing the fan up to align the
canopy screw holes with the
mounting holes on the ceiling plate.
Hold the canopy up with the screw holes
aligned. Partially install two canopy screws,
found in the
hardware bag, into the
holes opposite the ceiling plate hooks.
Partially install a canopy screw, found
in the
hardware bag, between
the ceiling plate hooks. When all the
holes are properly aligned, securely
tighten all three canopy screws.
Note: The slots in
the canopy must
remain engaged while
swinging the canopy
for alignment.
Place the receiver inside the
canopy. Ensure the wires
remain connected.
WARNING
FAN FALL HAZARD
Make sure screws are tight.
Ceiling Plate Hooks
Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Bulbs Remote
Fan style may vary.
Note:
Installing the Blades
Repeat x3
x9
BAG
Blade Screw
x9
BAG
Blade Washer
Put the blade washers found in the hardware
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Loading ...
Loading ...
Loading ...