Loading ...
Loading ...
3
Installation
1
Plastic
Retainers
2
3
x2
D
D
D
C
C
4
x4
D
D
Remove plastic retainers from door panel
and discard.
Remove plastic mounting brackets from
the dishwasher and discard.
Carefully open the dishwasher door.
Remove the (2) white caps from holes (C)
and the (2) top screws from holes (D) on
dishwasher door.
Carefully secure the door panel to the
dishwasher through holes (D) using the four
at PHD screws provided. Carefully tighten
all four screws and check to ensure that the
panel is square with the dishwasher door.
Do not over tighten screws. This may
cause damage to the inner door.
Note: Verify the operation of the door counterbalance springs after installation of the door skin.
Note: Verify that the door does not hit the kickplate. Adjust kickplate if necessary.
Loading ...
Loading ...
Loading ...