Loading ...
Loading ...
Loading ...
Installation
• If tube end is damaged, cut off %" before
reconnecting.
• If leaking occurs, reconnect the line.
3. Close doors.
4. Remove top hinge covers by
removing Phillips screws.
5. Unscrew _.;' hex head screws from
top hinges.
For water dispensing
models only:
Do ROt remove screw
connecting green ground
w ire.
6. For ice and water
dispensing models only: Detach main wire
connector harness and red wire harness.
To detach main wire
harness, use a flat blade
tool or fingernail to press
junction point between two
connectors to release.
To detach red wire harness,
press tab on underside of
connector to release.
7. Remove top hinges along with
doors.
Replacing the Doors
• To replace the doors, follow the steps in Door and
Hinge Removal in reverse order.
IMPORTANT: If water line tube end is damaged, cut
off 5/8"before reconnecting.
Connecting the Water Supply
([select models)
8. Remove bottom hinges with a %" hex head driver.
Loading ...
Loading ...
Loading ...