Loading ...
Loading ...
Loading ...
8
Only warming separately, without frothing.
1. Place the appliance on a flat surface.
2. Then open the lid, insert the frothing paddle onto the shaft on the bottom of jar.
3. Fill the jar with the desired amount of milk, and replace the lid.
The max milk quantity permitted to add is 300ml(see Fig. 1), to NOTE:
avoid milk overflowing after mixing. The min milk quantity permitted to
add is 75ml.
Please use whole milk, frozen milk (7-9°C).NOTE:
4. Connect the plug into a power outlet.
5. Press the FUNTION button three times, the working indicator of “Only warming
separately, without frothing”will blink. Then press the ON/OFF button once,
the working indicator of “Only warming separately, without frothing”willturn to
illuminate solidly, the appliance will start to work. Once the temperature of
milk has achieved the setting value, appliance will stop working;
6. When the appliance has stopped operating, open the lid, pour out the warm
milk and enjoy it.
Minimum 3 minutes rest time must be maintained between two Caution:
continuous cycles, otherwise, the appliance will enter self-protection state
automatically after working for 5 cycles continuously, the working indicator
will flash and the switch button will not be activated, after about 5 minutes,
the appliance will enter standby state and you can continue operating the
appliance.
Please cleanthejaraccording to the section “CLEANING AND NOTE:
MAINTENANCE”between two continuous cycles.
7. Always turn off the milk frother and disconnect the power supply when not use.
Loading ...
Loading ...
Loading ...