Loading ...
Loading ...
Loading ...
[]
Symptom Cause Solution
No detergent. Detergent suction tube not Check connection.
Garden hose
connection leaks.
Spray wand leaks.
Pump is noisy.
Water leaks from
pump (up to 10
drops per minute
is permissible).
Oil Drip.
prope#y connected to the
machine.
Detergent is too thick. Dilute detergent, for best results use
K_cher detergent.
Filter on detergent suction Run warm water through filter to
tube is clogged, remove debris.
Damaged or clogged Remove obstruction or replace
detergent suction tube. detergent suction tube.
Spray wand is in high Turn spray wend tip to low pressure
pressure position, position.
Discharge nozzle is Blow out or remove debris with a
obstructed, fine needle.
Loose fitting. Tighten fittings.
MissingA_om rubber washer. Insert new washer.
Sp,ay wand not proper_ Insert the spray wend into the tngger
attached, gun. CarefulPypress in against the
sphng tension and twist intothe
locked position.
Broken o-ring or plastic
insert.
Pump is sucking air.
Call K&_her customer service
hotline and order repair kit
(part no. 2,883-111 .O).
Check that hoses end f_ings are air
tight. Turn off machine end purge
pump by squeezing trigger gun untit
a steady flow of water emerges
through the nozzle.
Loose fittings. Check that nil f_ings are tight.
Thermal protection device Thermal protection de_ce will
has been activated, automatically reset.
Water seals are damaged Call esrvice center.
or worn.
Oi_esais
are damaged or
worn.
Call service center.
If you encounter any additional
difficulties not listed, please call
our service center for help,
Karcher Customer Support USA