Loading ...
Loading ...
Loading ...
......................................................................................................................................................................................................................................................................Alternate installations for close clearances
Choose your exhaust installation type Venting systems come in many varieties. Select the type best for
your installation. Two close-clearance installations are shown.
Recommended exhaust installations Refer to the manufacturer's instructions.
Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.
B
A ........
A. Dryer
B. Elbow
C. Wall
D. Exhaust hood
Optional exhaust installations
This dryer can be converted to exhaust out the right side, left
side, or through the bottom. Contact your local dealer to have the
dryer converted.
Fire Hazard
Cover unused exhaust holes with one of the
following kits:
279818 (white)
279915 (bmack diamond)
280102 (pacific blue)
280103 (champagne)
280189 (baromo)
Contact your mocatdeaBer.
Failure to fommowthese instructions can result in death,
fire, emectrica{ shock, or serious injury.
A B C
A. Standard rear offset exhaust installation
B. Left or right side exhaust installation
C. Bottom exhaust installation (not an option
with pedestal installations)
A
_c-C-
II
[- ,V"
L ,;'
n
Js
,[
\ r
A. Over-the-top installation (alsoavailable with one offset elbow)
B. Periscope installation
NOTE: The following kits for close clearance alternate
installations are available for purchase. For further information
please call 1-8O0-4-MY-HOME ®(1-800-469-4663).
• Over-the-Top Installation:
Part Number 26-49900
• Periscope Installation (For use with dryer vent to wall vent
mismatch):
Part Number 26-49901 - Less than 5" (12.7 cm) mismatch
Part Number 26-49908 - 5" (12.7 cm) to 18" (45.72 cm)
mismatch
Part Number 26-49904 - 18" (45.72 cm) to 29" (73.66 cm)
mismatch
Part Number 26-49905 - 29" (73.66 cm) to 50" (127 cm)
mismatch
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible
portion of the mobile home structure and must not terminate
beneath the mobile home. Terminate the exhaust vent outside.
Determine vent path
• Select the route that will provide the straightest and most
direct path outdoors.
• Plan the installation to use the fewest number of elbows and
turns.
• When using elbows or making turns, allow as much room as
possible.
• Bend vent gradually to avoid kinking.
• Use the fewest 90 ° turns possible.
14
Loading ...
Loading ...
Loading ...