Loading ...
Loading ...
Loading ...
22
DVQX1834 (ENG)
Note
0 When carrying, the lens hood can be attached in the
reverse direction.
1 Remove the lens hood.
2 Align mark B ( ) on the lens hood with the mark
on the tip of the lens.
3 Attach the lens hood by rotating it in the direction of
the arrow until it clicks.
0 It is recommended to remove the lens hood during
flash photography as the lens hood can block the light
from the flash.
0 To prevent dropping of the lens, you should never carry
the lens by just holding the lens hood.
∫ Notes on filter use
0
It is possible to attach the lens cap or the lens hood
with the filter already attached.
0 There may be some vignetting in recorded images if
multiple filters are attached simultaneously.
0 It is not possible to attach any items other than filters
such as a conversion lens or adaptor to the front of the
lens and use it in combination with this lens.
Lens damage may result if such items are attached.
Switching AF/MF
Switch AF/MF by sliding the
focus ring
A
forwards or
backwards (focus clutch
mechanism).
0 When the digital camera is
set to MF, the operation will
be MF irrespective of the
position of the focus ring.
0 Check the length indication
B when using MF. Use it as a
guide for focusing.
AF MF
1
0.28
0.33
0.4
0.5 m
1.2
1.5
0.7
2.5
1.5
5feet
ĩ
H-X1025-DVQX1834.book 22 ページ ２０１９年６月１３日 木曜日 午後２時１１分
Loading ...
Loading ...
Loading ...