Loading ...
Loading ...
Loading ...
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Tosanitize your dishes and Raises the water temperature in the final rinse to Heavy Wash, Normal
glassware in accordance approximately 154°F (68°C). This high temperature rinse Wash, Light, Insta
with NSF/ANSI Standard sanitizes your dishes and glassware in accordance with Wash, or Auto Clean
184 for Residential NSF/ANSI Standard 184 for Residential Dishwashers. Plus
Dishwashers. Certified residential dishwashers are not intended for
licensed food establishments.
The Sanitize option adds heat and time to the cycle.
use for loads With normal Provides deep clean and Shine bYadding steam to the cYcle: Heaw, Noimai, &Auto
amounts of food soils; Raises the water temperature in the f nal rinse to Clean Plus cycles
spec!anzea opuon Tot approximately 154OF(68oc).
siemware ana g ass
cleaning,
Loads containing tough, Increases the target water temperature during the wash Heavy, Normal, & Auto
baked-on food. portions of the cycle. Clean Plus cycles
Adds heat, wash time and water to the cycle.
Torun .y.0Uidishwasher at Delays the start era CYc!e Up tO 6 hour s A!! CYc!es
a ater t me or dur ng off
, ; -Select awash cycle and optionsl Press Delay. Press START/
;, _, peaK n0urs: RESUME. Close the door firmly '
Control Lock
@ locked
hold to lock
Toavoid unintended use of
your dishwasher, or cycle
and option changes during
a cycle.
To turn on Lock, press and hold Heated Dry for at least
3 seconds.
To turn off Lock, press and hold Heated Dry for at least
3 seconds.
When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
5 times. The dishwasher door can be opened while the
controls are locked.
Anytime
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To start or resume a !f the door is opened during a cycle orthe power is interrupted, al! lights wi!l flash to indicate awash cycle suspended cyc!el The cycle will not resume until the door is closed and the START/RESUME
@start ..................................... button is pushed ..............................................................................................................................
resume
drain
To cancelwash
cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
clean_ TO follow the The !,Clean" indicator glows Whena cycle is finished.
,_nt,ze__ progress and status
! ', .: . . ifY0u Select the sanitize option; When the Sanitize cYc!e is finished, the sanitized indicator glowsl
wash dr dean O1" your alsnwasner
y . If your dishwasher did not properly sanitize your dishes, the light will not come oni This can
cyc e
happen if the cycle is interrupted, or the water could not be heated to the required temperature,
The c!ean and sanitize !ights go 0ff when the door has been opened for more than 30 seconds 0r
the CANCEL key is pressed,
The ""Washing indicator glows at the start of the first fi!l Of any cYc!e (exPect Rinse On!y)and
remains on unti! the end of the main wash cyc!e.
The "Drying"indicator glows during the drying portion of each cycle (expect Insta Wash and
.................. Rinse Only).
Loading ...
Loading ...
Loading ...