Loading ...
Loading ...
Loading ...
9
OPERATION
Double Bagger Usage
NOTE: When both grass bags are full, place the tractor on a firm, level surface, disengage the PTO, turn
the tractor engine off and set the parking brake.
1. Open hood by pushing in on the rear side tabs with your hand (1), and lifting
the cover with your other hand in the center rear of the bagger cover (2) as
shown in Figure 29.
2. Do not remove the chute tube assembly from the tractor.
3. Remove both bag assemblies from the bag support branches by lifting the
back edge up first, and then sliding the front edge out and up until it is clear
of the frame. See Figure 30.
4. Empty the grass clippings at a proper disposal site, use the handle at the
bottom of each grass bag. Holding the bag firmly, empty the contents.
5. Replace grass bags, close lid, flip down seat, restart your tractor, release
parking brake and resume cutting your grass.
Figure 29
Figure 30
Loading ...
Loading ...
Loading ...