Loading ...
Loading ...
Loading ...
– 11 –
8. ASSEMBLING THE BENCH DRILL
Note: Remove the plug from the socket before
carrying out adjustment, servicing or maintenance.
8.1 BASE TO COLUMN – FIG. 1
Align the column (10) onto the base (20) and
secure with the three 12mm bolts and washers
(21).
Note: Do not over-tighten the bolts as this may
crack the flange.
8.2 TABLE – FIG. 2
Pass the table bracket (16) over the column and
secure the locking lever (17).
Note: Adjust the height to suit and position the
table centrally over the base.
8.3 HEAD – FIG. 3
Lift the head (23) onto the top of the column.
When aligned and located fully tighten grub screw
with the hexagon key supplied.
Note: Adjust the drill head over the table and base
before securing.
8.4 PLUNGE HANDLES – FIG. 4
Screw the three plunge handles (22) into the
pinion shaft (12).
1
2
FIG.
FIG.
3
4
FIG.
FIG.
(23)
(10)
(20)
(21)
(17)
(18)
(22)
(12)
Loading ...
Loading ...
Loading ...