Loading ...
Loading ...
Loading ...
15
▯ Make sure rubber washers are in place at both ends of
the water supply hose. Missing washers could cause
leaks.
▯ The connection points are under full water pressure.
Turn on the water tap and check for leaks.
▯ Periodically inspect the water supply hose and replace
with a new hose if cuts, kinks or leaks are observed.
Water connection hoses
▯ red - Hot water-hose
▯ blue - Cold water-hose
Attach this end to water tap. Hand tighten only.
Attach this end of the hose to the back of the washing
machine as shown in the following pictures. Be sure to
use clamps and route hoses as instructed. Hand
tighten only.
Position hoses as shown when routing hoses to right
side of washer (facing from front).
Position hoses as shown when routing hoses to left side
of washer (facing from front).
PD[
PD[
Loading ...
Loading ...
Loading ...