Loading ...
Loading ...
Loading ...
Energy Saver Dry
Select this option to dry dishes without heat and save energy.
Energy Saver Dry is useful when loads contain plastic dinnerware
that may be sensitive to high temperatures.
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Rinse Only automatically uses this option. Energy Saver
Dry is an option with all other cycles.
Control Lock
Use Control Lock to prevent your dishwasher from accidentally
being turned on. Use Control Lock, also, to prevent accidental
cycle or option changes during a cycle.
O Control Lock
When CONTROL LOCK is lit, all buttons are disabled.
NOTES:
• The dishwasher door can be opened while the controls are
locked.
• You can turn on the Lock while the dishwasher is running.
• To turn on the Look
Press and hold
for 4 seconds. CONTROL LOCK glows.
If you press any pad while your dishwasher control is locked, the
light flashes 3 times.
To turn off the Lock
Press and hold ENERGY SAVER DRY for 4 seconds, The light
turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, close the door firmly until it
latches. The delay countdown will not continue if the door is not
latched.
To delay the start
1. Open the door.
2. Select a wash cycle and options.
3. Press
You will see
showing in the display.
4. Close the door,
5. Press Start.
O
NOTE: To cancel the delay, press 4 HOUR DELAY to turn the light
off or press Start.
IMPORTANT:
• Operate your dishwasher only when you are at home.
• If your home is equipped with a water softener, do not start
the dishwasher during the regeneration of the softener.
Followthe progress of your dishwasher withtheCycle Status
indicators.
O O O O O f Q Add Rinse Aid
Sensing/ Add a Water Clean Sanitized
/Soak Dish Heating Q (:ontrot Lock
Add Rinse Aid
Fillthe Rinse Aid dispenser when ADD RINSE AID is lit. A rinse
aid prevents water from forming droplets that can dry as spots or
streaks.
If the Rinse Aid dispenser is empty, the light glows when you
select a cycle or while a cycle is running.
Sensing/Soak
Your dishwasher senses the soil level on the dishes. Soil level
determines the length of some cycles, the amount of heat or
water added, and the cycle needed for the load. Soaks help
loosen soils on the dishes.
SENSING/SOAK glows during the sensing and soak parts of the
cycle. Wash action continues while sensing occurs. Wash action
pauses during a soak.
Add a Dish
After a cycle starts, you can add an item to your dishwasher while
ADD A DISH glows. After the light turns off, items added to the
dishwasher may not be completely cleaned.
Water Heating
WATER HEATING glows, and the cycle progression pauses,
whenever water is heated to a set temperature during a cycle.
Wash or rinse action continues as the water heats.
Clean
CLEAN glows when a cycle is finished. The light turns off when
you open and close the door or press Cancel/Drain.
Sanitized
If you select the Sani Rinse option, SANITIZED glows when the
Sani Rinse cycle is finished. If your dishwasher did not properly
sanitize your dishes, the light flashes at the end of the cycle. This
can happen if the cycle is interrupted or the incoming water
temperature is too low. The light goes off when you open and
close the door.
14
Loading ...
Loading ...
Loading ...