Loading ...
Loading ...
Loading ...
35
If the model is not vented
to the outside, the air will
be recirculated through a
disposable charcoal filter
that helps remove smoke
and odors.
The charcoal filter should
be replaced when it is
noticeably dirty or
discolored (usually after
6–12 months, depending
on hood usage). See
“Optional Kits,” page 9,
for more information.
The charcoal filter
cannot be cleaned. It
must be replaced. Order
Part No. WB06X10823
from your GE supplier.
Charcoal Filter
(on some models)
To remove the charcoal
filter, disconnect power
at the main fuse or circuit
breaker panel or pull
the plug.
Remove the top grille by
removing the 3 screws on
top of the oven that hold
the grille in place. Slide
the grille to the left to
remove it.
Push the filter at the
bottom until it comes free
of the locking tabs. Slide
the filter down and out.
To Remove
Charcoal Filter
Remove 3 grille screws
to remove the grille.
To install a new filter,
remove plastic and other
outer wrapping from the
new filter.
Insert the filter into the left
side of the front top
opening of the oven as
shown. It will rest at an
angle on 2 side support tabs
and in front of the right
rear tab. Replace the grille
and 3 screws.
To Install
Charcoal Filter
Filter housing
Loading ...
Loading ...
Loading ...