Loading ...
Loading ...
Loading ...
11
OPERATION
Blade Control
Recoil Starter
Deck Wash*
Cutting Height
Adjustment
Lever*
C
utting Height
Adjustment
Lever*
Side Discharge
Cover
Drive Control
Drive Control
Mulching
Cover
Trail Shield
Mulc
h Plug*
Figure 12
Meets ANSI Safety Standards
Craftsman Lawn Mowers conform to the safety standard of the American National Standards Institute (ANSI).
Blade Control
The blade control is attached to the upper handle of the mower. Depress and
squeeze it against the upper handle to operate the unit. Release it to stop engine
and blade.
WARNING
This blade control is a safety device. Never attempt to bypass its operation.
Drive Control - Dual Lever
The drive controls are located on top of the upper handle and are used to engage
the drive. Squeeze the right, left, or both right and left controls against the upper
handle to engage the drive; release it/them to slow down or stop mower from
propelling.
Cutting Height Adjustment Lever - Dual Lever
One adjustment lever is located on the right rear wheel and one is located on the
right front wheel. Both levers have to be at the same position to ensure a uniform
cut. To adjust the cutting height, refer to the Assembly Section.
Side Discharge Cover (If Equipped)
Your mower is shipped as a mulcher. To discharge the grass clippings to the side
instead, follow the instructions in the Assembly section to attach the side discharge
cover.
WARNING
Keep hands and feet away from the chute area on cutting deck. Refer to
warning label on the unit.
Loading ...
Loading ...
Loading ...