Loading ...
Loading ...
Loading ...
Soak
Use the soak cycle to remove small spots or stains on fabrics.
This cycle provides a soak time with warm or cold water followed
by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and soaking time without drum
movement help improve the removal of stains. Drain without spin
assures gentle treatment, even for delicate items.
To use the soak cycle:
• Add detergent only to Main detergent compartment of the
dispenser drawer.
Select SOAK.
Choose the desired soak temperature.
Select and Hold START (approximately 1 second).
When your soak cycle is complete, you will need to start a
wash cycle to complete the cleaning of your garments.
Rinse/Drain & Spin
Use this cycle to rinse, drain, and spin your wash load. This cycle
combines fast-speed tumbling and high-speed spin. If desired,
you can reduce the spin speed by selecting the speed you want
from the SPIN SPEED modifier.
Rinse/Drain & Spin is useful for
• Loadsthat need rinsing only.
• Adding fabric softener to a load using the fabric softener
dispenser.
Drain & Spin
Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to high. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, handwashables, and
woolens should be drained with no spin or low spin to avoid
fabric stress.
To use Drain & Spin setting
• Select RINSE/DRAIN & SPIN cycle.
• Press the 2ND RINSE button to deselect the rinse option.
• Press START.
Clean Washer
Use the Clean Washer cycle once a month to keep the inside of
your washer fresh and clean. This cycle uses a higher water level
in combination with liquid chlorine bleach to thoroughly clean the
inside of your washing machine. See "Cleaning Your Washer."
IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer cycle. Use this cycle with an empty
wash drum.
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked or unlocked, and during the washing, rinsing, or spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation. See "Troubleshooting."
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles.
O Prewash
_ ave Energy Plus
Stain Treat
¢_2nd Rinse
See the "Laundry Guide" section for an overview of possible
options for each Wash Cycle selection.
If an option is available with a selected cycle, the light for that
option will illuminate when selected.
If an option is unavailable with a selected cycle, there will be a
short tone and the light for that option will not illuminate when
selected.
Prewash
Use this option for loads of heavily soiled items that need
pretreatment.
• Add detergent to Main Wash compartment of the dispenser
drawer.
This option adds tumbling time prior to the selected main cycle.
The washer continues automatically from prewash into the main
wash cycle.
Save Energy Plus
The Save Energy Plus option allows you to increase your energy
savings on the higher temperature cycles (Whitest Whites and
Heavy Duty) while maintaining cleaning performance by
lengthening the wash time by only 16 minutes.
NOTE: For the best energy performance, use the Normal/Casual
cycle.
17
Loading ...
Loading ...
Loading ...