Loading ...
Loading ...
Loading ...
Loadingand usingthe dryer.
Always follow the fabric manufacturer's care label when laundering.
Sorting and Loading Hints
As a general rule, if clothes are sorted properly for the
washer, theg are sorted properly for the drgeE
Do not add fabric softener sheets once the load has
become warm. They may cause fabric softener stains.
Bounce ®Fabric Conditioner Dryer Sheets hove been
approved for use in all GEDryers when used in
accordance with the manufacturer's instructions.
Do not overload.Thiswastes energy and causes
wrinkling.
Do not dry the following items: fiberglassitems,
woolens,rubber-coated items, plastics,items with
plastictrim and foam-filled items.
Careand Cleaning of the Dryer
The Exterior: Wipe or dust any spills or washing
compounds with a damp cloth. Dryer control
panel and finishes may be damaged by some
laundry pretreatment soil and stain remover products.
Apply these products awag from the dryeE The fabric
may then be washed and dried normally. Damage to
your dryer caused bg these products is not covered
by gour warranty.
The Lint Filter: Clean the lint filter before each
use. Moisten your fingers and reach into the filter
opening. Run your fingers across the filten Have a
qualified technician vacuum the lint from the dryer
once a gear
Stainless Steel: To clean stainless steel surfaces,
use a damp cloth with a mild, non-abrasive cleaner
suitable for stainless steel surfaces. Removethe
cleaner residue, and then dry with a clean cloth.
TheExhaust Duct: Inspect and clean the exhaust
ducting at leastonce a gear to prevent clogging.
Apartially clogged exhaust can lengthen the
drying time.
Follow these steps:
M Turn off electrical supply bg disconnecting the
plug from the wall socket.
F_ Disconnectthe duct from the dryer
F_ Vacuum the duct with the hose attachment and
reconnect the duct.
TheExhaust Hood: Checkfrom the outsidethat the
flaps ofthe hood move freely when operating. Hake
surethat there isnot wildlife (birds,insects,etc.)nesting
insidethe duct or hood.
10
Loading ...
Loading ...
Loading ...