Loading ...
Loading ...
Loading ...
Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need al! of these material,
depending on your type of installation.
WATER HEATER [_l_.,_bl,_;,* _
INSTALLATION _'_"_"
K,T W,TH FLEX,BLE
CONNECTORS
FOR 3/4" (19,05 ram) i_ ....................
OR 1/2" (12=7 ram)
THREADED OR
COPPER PLUMBING
FLEX{BLE WATER HEATER GAS
CONNECTOR WiTH FITTINGS
DRAIN PANS AVAILABLE IN 20" (508 ram)
DIAMETER FOR WATER HEATERS
HAVING A DIAMETER 18" (457 ram) OR
LESS, 24" (610ram) DIAMETER FOR
WATER HEATERS HAVING AD{AMETER
22" (559 ram) OR LESSAND AVAILABLE
IN 28" (711 mr#) DIAMETER FOR WATER
HEATERS HAVING A DIAMETER 25"
(660 ram) OR LESS
WATER HEATER HEAT
TRAPS HELP REDUCE
HEAT LOSS DUE TO
THERMAL SIPHONING
EXPANSION TANKS FOR THERMAL EXPANSION
CONDiTiONS AVAILABLE IN 2 GALLONS
(7.6 L_TERS) AND 5 GALLONS 118.9 LITERS)
CAPAC[TYTHROUGH LOCAL SEARS STORE OR
SERVICE CENTER
Basic Tools
You may or may not need al! these tools, depending on your
type of installation. These tools can be purchased at your local
Sears Store.
Pipe Wrenches (2) 14" (356 ram)
Screwdriver
Tin Snips
6' (1.82 m) Tape or Folding Ruler
Garden Hose
DriH
Pipe Dope or Teflon Tape DRILL
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
TIN SNIPS
ROLL OF TEFLON
TAPE(USE ONLYON
WATER HEATER
CONNECTIONS)
PiPE DOPE
(SQUEEZE TUBE)
USEFOR WATER AND GAS
CONNECTIONS
GARDEN HOSE 5 FOOT TAPE PIPE WRENCH
Additiona[ Tools Needed
When Sweat Soldering
Tubing Cutters or Hacksaw
Propane Tank
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
TUBING CUTTER
PROPANE
TORCH
HACKSAW
ROLL OF
EMERYCLOTH
3;4" (19 ram) WIRE BRUSH
1/2" (15 ram) WIRE BRUSH
ROLL OF LEAD-FREE
SOFTSOLDER
SOLDER
FLUX
Loading ...
Loading ...
Loading ...