Loading ...
Loading ...
Loading ...
05/2017
- 7 -
Copyright © 2017, Fast ČR, a.s.
EN
Food Processor
User'smanual
■ Prior to using this appliance, please read the user’s manual thoroughly, even if you
already have experience in using simi
lar appl
iances. Only use the appliance in the manner
described in this user’smanual. Keep this user’smanual in asafe place where it can be
easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging material, purchase receipt
and responsibility statement of the vendor or warranty card for at least the duration of
the legal liability for unsatisfactory performance or quality. In the event of transportation,
we recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Button for releasing the meat grinder
from the front attachment hub
A2 Removable cover of the front meat
grinder attachment hub
A3 A-shaped beater
A4 Balloon whisk
A5 Kneading hook
A6 Removable cover of the top blender
attachment hub
A7 Tilt-out multi-function head
A8 Attachment hub for mounting
attachments A3–A5
A9 Bowl cover with ahole for adding
ingredients
A10 4.5-litre stainless steel bowl
A11 Base unit
A12 Speed control knob
Serves to gradually set the speed level
MIN-1-2-3-4-5-6-MAX, set the pulse
level (PULSE) and to turning off the
appliance (OFF).
A13 Multi-function head release lock
A14 Anti-slip feet for stability of the
appliance during operation
A15 Lid
serves to close the stainless steel
bowl A10 for short term storage of
processed ingredients.
DESCRIPTION OF MEAT GRINDER ACCESSORIES
B1 Pusher
B2 Stainless steel hopper
B3 Feed tube
B4 Grinding chamber
B5 Screw shaft
B6 Grinding blade
B7 Screw ring
B8 Fine grinding plate
B9 Medium fine grinding plate
B10 Coarse grinding plate
B11 Separator
B12 Sausage stuffer attachment
B13 Moulder
B14 Conical attachment
B15 Cookie maker
B16 Cookie maker holder
Note:
Parts B11–B14 are contained inside the pusher B1.
Certain models are only equipped with ane and coarse grinding disc B8 and
B10.
DESCRIPTION OF THE BLENDER ACCESSORIES
C1 Inner cap of the blending jar
C2 Outer lid of the blending jar with
ahole for adding ingredients
C3 Handle
C4 Glass blending jar with 1.5l capacity
C5 Cu
C6 Blade assembly
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all accessory parts that are intended to come into contact with food
using warm water and aneutral kitchen detergent. Then rinse under clean running water
and thoroughly wipe dry with ane wiping cloth or allow them to dry naturally. After
washing and drying, we recommend to coat the grinding blade B6 and the grinding
plates B8–B10 with cooking oil.
3. Do not submerge the food processor or its power cord in water or any other liquids.
Attention:
The metal parts of the meat grinder and attachments A3–A5 are not
intended for
washing in adishwasher. Other removable parts may be washed in adishwasher.
BEATING, WHIPPING AND KNEADING
SELECTING ATTACHMENT TYPES
Attachment type Purpose of use
Beater A3 It is used for beating light and medium heavy yeast-free doughs, for
preparing sauces, creams, llings, etc. Do not use it for kneading
heavy doughs.
Balloon whisk A4 It is used for whisking whole eggs or egg whites, whipped cream,
foamy creams, etc.
Do not use it for beating or kneading doughs.
Kneading hook A5 It is used for kneading various types of doughs including heavy and
thick doughs such as for example bread dough, pizza dough, fresh
pastry doughs, etc.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
■ Before you start assembling or disassembling the food processor, check that it is turned
o and disconnected from the el. power socket.
1. Inserting the bowl and attaching the cover
1.1 Place the food processor on an even, dry and stable surface, for example on akitchen
countertop.
1.2 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After
tilting out the multi-function head A7 release the lock A13. Locking of the multi-function
head A7 inthe top open position is indicated by the lock A13 returning to the default
position, which is accompanied by an audible click.
1.3 Insert the stainless steel bowl A10 into the base unit A11 and secure it in place by turning
it clockwise. When the bowl A10 is properly attached, it cannot be separately lifted out of
the base unit A11.
1.4 On to the bottom part of the multi-function head A7 with attachment hub A8, slide the
cover A9 so that the latches along the perimeter of the round opening in the cover A9
slide into the grooves along the perimeter of the attachment hub A8.
1.5 The lid A15 is used for covering the bowl A10 for short term storage of processed
ingredients.
2. Mounting attachments
2.1 When attaching an attachment, the multi-function head A7 must be locked in the
open position, see point 1.2 in the previous chapter. To attachment hub A8, attach
one of the attachments A3–A5 in such away that the attachment hub shaft A8 slides
into the attachment. Push the attachment towards the attachment hub A8 and turn it
anticlockwise to secure it in place. Lightly pull the attachment downwards with one hand
to check that it is properly attached.
2.2 Place the ingredients that you wish to process into the bowl A10. Release the lock A13
and tilt the multi-function head A7 to ahorizontal position. After tilting down the multi-
function head A7, release the lock A13. The locked status of the multi-function head A7
in the tilted down work position is indicated by the lock A13 returning to the default
position. This is accompanied by an audible click.
3. Disassembly
3.1 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After
tilting out the multi-function head A7, release the lock A13. Locking of the multi-
function head A7 inthe top open position is indicated by the lock A13 returning to the
default position, which is accompanied by an audible click.
3.2 Push the attachment towards the attachment hubA8 andturn it clockwise to release it,
and then remove it. Turn the bowl A10 anticlockwise and remove it from the base unit
A11. Remove the cover A9 by pulling it downwards. Move the multi-function head A7
back to the horizontal position.
USING THE FOOD PROCESSOR
1. Select the right type of attachment based on its intended use and assemble the
appliance according to the instructions in the chapter Assembling and disassembling
the appliance. Place the ingredients into the bowl A10.
Attention:
In asingle batch, it is possible to precess no more than 2.2 litres of light dough or
0.8 litres of thick, heavy dough. The maximum number of egg whites that can be
whisked at once is 12. We recommend that you do not ll the bowl A10 past the
level of the 3l mark. If an insucient amount of ingredients are put in the bowl
A10 (less than 0.3 litres of dough), then they may not be optimally processed.
2. Make sure that the multi-function head A7 is tilted down in the horizontal working
position and that the speed control knob A12 is set to the OFF position. Connect the
power cord to apower socket.
3. Set the required speed using the speed control knob A12. Gradually turn the speed
control knob A12 clockwise to increase the speed, turning it in the opposite direction will
reduce the speed. To initially stir in the ingredients, rst set alower speed and then adjust
it as required. Electronic speed regulation ensures that the set speed will be maintained
under various loads. While it is running, ingredients may be added into the bowl A10
through the hole in the cover A9.
4. The pulse mode is used for increasing the speed to maximum for ashort time. To activate
the pulse mode, turn the speed control knob A12 to the PULSE position and to ensure
continuous operation hold it down in this position. As soon as you release the speed
control knob A12, it will automatically return to the OFF position.
5. If it is necessary to wipe ingredients o the inside of the mixing bowl A10 and the
attachment, rst turn o the food processor by setting the speed control knob A12 to
the OFF position and then disconnect it from the power socket. Wait until the rotating
parts come to astop and only then scrape away the ingredients with aspatula.
6. After you have nished using the appliance, set the speed control knob A12 to the OFF
position and disconnect the power cord from the power socket.
7. Wait until the rotating parts come to astop and disassemble the food mixer according
to the instructions included in chapter Assembling and disassembling the appliance. Use
asoft plastic spatula to empty out the contents of the bowl A10.
8. Clean out the food processor after each use according to the instructions in chapter
Cleaning and maintenance.
LED LIGHT
■ The multi-function head A7 has a LED light that turns on automatically when the food
processor is connected to a power socket. The LED light turns o automatically after
2.5 minutes of inactivity, i.e. when the appliance is not running or when the speed is not
set during this time. The LED light turns on again automatically when the food processor
is put into operation by the control knob A12 being set to a desired speed level.
Loading ...
Loading ...
Loading ...