Loading ...
• The start and cycle duration are maintained during OFF or RUN mode.
• The dial must remain in RUN position in order for the cycle to run. If the dial is turned to any other position, the
watering will stop.
• Rain drops indication will appear on the screen for the corresponding valve when watering is in process.
SET RAIN DELAY (WATERING DELAY)
• With the dial in the RUN position, pressing (+) button will cause a 24-hour delay to the program.
• Same delay will occur on both Left and Right valves.
• Delays of 0, 24, 48 and 72 hours are possible. Delay time can be changed by pressing the + or – button at any time.
• Display will flash between clock and hours remaining before programmed cycle resumes.
• To remove watering delay, turn the dial OFF and then turn it back to RUN or reduce the delay timer to 0.
MANUAL (INSTANT) WATERING
• Set the dial to the “RUN” position and press and the valve will o
pen after 5 seconds.
• Press “+” or “-“to change the Run Time
• If the user has set the program, Run Time is taken from the time set by the user. The left side takes the remaining time from
the left and the right side takes the remaining time from the right.
• When the user has set all the way to the program, and the other way is not set the manual will not be set when the
road is defined as not open.
• If only one outlet is being used L or R you will still be required to set both sides but in this case the outlet that
will not be in use you will need to set the time to “0”
OFF
• Turning the dial to the OFF position from any other position will stop the manual or the programmed watering immediately.
INSTALLATION
• After programming the timer attach the timer to the outdoor faucet, then turn the faucet on.
• Do not use on outlets with ‘Y’ end connectors or other hose accessories.
TROUBLESHOOTING
NO DISPLAY
• Ensure batteries are installed properly
• Check if batteries are very low
DOES NOT WATER or DOES NOT COME ON AT DESIRED TIME
• Ensure the dial position is set on RUN
• Faucet is on
• Clock is set to the correct time including AM and PM
• Check if batteries are low
• Desired outlet (Left or Right) is programmed
• Rain delay is on
• Start time is set to desired time including AM and PM
WATER WON’T TURN OFF
• Ensure watering duration is set to the desired time
• The Manual Mode is on
• No power / batteries are drained.