Loading ...
Loading ...
Loading ...
KNOW YOUR SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with
the location of the various controls and adjustments. Save this manual for future
reference.
Chain
Adjustment Tool
(Bar Tool)
Front Hand Guard ''_
Chain Muffler
Z
Bar Oil FillCap Housing
FaC%l_ederCover
Throttle Lock
Lockout o
Throttle Choke
Trigger Knob Chain Chain Nuts
Brake Catcher
ON/STOP SWITCH
The ON/STOPSWITCHis used to stop
the engine.
THROTTLE TRIGGER
The THROTTLETRIGGERcontrols engine
speed.
THROTTLE LOCKOUT
The THROTTLE LOCKOUTmust be
pressed before you can squeeze the
throttle trigger. This feature prevents you
from accidentally squeezing the trigger.
FAST IDLE LOCK
The FASTIDLE LOCK holds the throttle
trigger in the starting position. Activate
the fast idle lock by pressing the throttle
lockout and squeezing the throttle trig-
ger. With the throttle trigger squeezed,
press the fast idle lock. Release the
throttle lockout and trigger while holding
the fast idle lock button.
Front Handle
Starter Rope
ON/STOP
Switch
Primer
Bulb
Fuel Mix Fill Cap
Adjusting C[_ain.
Screw oU__r(a[Iv°e_
Sprocket
Hole
CHOKE KNOB
The CHOKEKNOBactivates the choke to
provide additional fuel to the engine dur-
ing cold starting.
PRIMER BULB
The PRIMERBULB circulates fuel to the
carburetor to provide quicker starting.
CHAIN BRAKE
The CHAINBRAKE isa device designed
to stop the chain if kickback occurs.
The chain brake activates automatically
in the event of kickback. The chain
brake activates manually if the front
hand guard is pushed forward. The
chain brake is disengaged by pulling the
front hand guard back toward the front
handle as far as possible.
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes of operation. You
should check your chain tension fre-
quently. See CHAINTENSION under the
SERVICEAND ADJUSTMENTS section.
Loading ...
Loading ...
Loading ...