Loading ...
Loading ...
Loading ...
Use and Care Guide
Printed in USA 10 0213
Problem Cause Solution
Compartments are warmer than
usual.
- Control preset is set to warm.
- Light is staying on.
- Condenser is dirty or obstructed.
- The door is open or has been opened
more frequently lately.
- Internal louvers and/or the fan guard
is obstructed.
- Warm product was recently placed in
the cabinet.
- Lower the setpoint temperature. Refer to
changing the setpoint for the specifi c model.
- Turn the manual light switch off.
- Clean the condenser and clear obstruction.
- Wait 24 hours and recheck the temperature.
- Reset the preset temperature if necessary -
refer to page 4 of this guide.
- Make sure the louvers and/or the fan are
not obstructed.
- Wait 24 hours for product to chill, then
recheck the temperature.
System runs for a long period of
time.
- Condenser is dirty or obstructed.
- Door was kept open for a long time or
was opened more frequently, or warm
product was recently placed in the
cabinet.
- Hot day and warm room temperature.
- Clean the condenser and clear obstruction.
- Wait 24 hours and recheck temperature.
- Normal for the system to run more
frequently.
Condensation forms inside the
compartments.
- High humidity and/or frequent door
opening.
- Door not closing and sealing properly.
- Normal operation.
- Make sure the door is closing properly.
Check the door seal and replace it if
necessary.
Condensation forms on the
outside of the unit.
- High humidity and/or frequent door
opening.
- Door is not closing and sealing
properly.
- Normal operation.
- Make sure the door is closing properly.
Check the door seal and replace it if
necessary.
- If condensation persists, contact Perlick
Technical Service at 800-558-5592.
For Product Information
• Contact your selling dealer.
• Inquire via the web at www.perlick.com.
• Call 800-558-5592 for factory assistance on
planning installation or product information.
• Write to Perlick Corporation, Customer
Service Department, 8300 West Good Hope
Road, Milwaukee, WI 53223.
• Email us at [email protected].
For Product Service
• Check the model and serial number of your
unit located on the label attached to the inside
top of the cabinet.
• Inquire via the web at www.perlick.com, or call
800-558-5592.
For Replacement Parts and Accessories
• Use only genuine Perlick replacement parts
and accessories. Genuine Perlick parts and
accessories are designed to work correctly
with Perlick products and offer superior
service life. The use of non-Perlick parts can
damage the unit and may void the warranty.
• Check the model and serial number of your
unit located on the label attached to the inside
top of the cabinet. Call your Perlick Factory
Authorized Service Center.
• Inquire via the web at www.perlick.com, or call
800-558-5592.
Loading ...
Loading ...