Loading ...
Loading ...
Loading ...
14
© 2021 United States Stove Company
WARNING:
POSITIONING OF THE LOGS IS CRITICAL TO THE
SAFE AND CLEAN OPERATION OF THIS HEATER.
SOOTING AND OTHER PROBLEMS MAY RESULT
IF THE LOGS ARE NOT PROPERLY AND FIRMLY
POSITIONED IN THE APPLIANCE. NEVER ADD
ADDITIONAL LOGS OR EMBELLISHMENTS
SUCH AS PINE CONES, VERMICULITE OR
ROCK WOOL TO THE HEATER. ONLY USE THE
LOGS SUPPLIED WITH THE UNIT. FAILURE TO
POSITION THE PARTS IN ACCORDANCE WITH
DIAGRAMS BELOW OR TO USE ONLY PARTS
SPECIFICALLY APPROVED FOR THIS HEATER
MAY RESULT IN PROPERTY DAMAGE OR
PERSONAL INJURY.
Before you begin - This unit is supplied with ve
ceramic ber logs. Do not handle these logs with
your bare hands. Always wear gloves to prevent skin
irritation from ceramic bers. After handling the
logs, wash your hands gently with soap and water
to remove any traces of bers. NOTE: When placing
logs DO NOT cover the burner ports.
Rear Log
Support
Bracket
Left Log
Support
Bracket
Right Log
Support Bracket
PILOT
OFF
Log Support
Bracket Studs
Burner Ports
1. To install the back log (#1), position on rear log
support bracket and then press down over
studs.
Right
Bottom
Log #3
Left Bottom
Log #2
Back Log #1
Right Top
Log #5
PILOT
OFF
Top Left
Log #4
2. Install left bottom log (#2) on left log support
bracket in front of back log.
Right
Bottom
Log #3
Left Bottom
Log #2
Back Log #1
Top Left
Log #4
Right Top
Log #5
PILOT
OFF
LOG PLACEMENT
Loading ...
Loading ...
Loading ...