Loading ...
Loading ...
Loading ...
1. Read all instructions thoroughly before beginning installation. See “DUCTING REQUIREMENTS
(DO’S AND DON’TS)” on page10.
• Weight and size: For safe installation, at least two people should be present to lift and hold the
hood. For larger hoods and installations with duct covers, it is advisable to have a third person
present to assist.
• Back Venting: If venting out the wall behind the vent instead of venting through the ceiling, see
“BACK VENTING” on page18 for details.
2. When installing a wall mount range hood, it is recommended that the bottom edge of the hood
be located 30” [76.2 cm] above the cooking surface for optimum performance.
3. Select the appropriate installation method.
Method 1 is suitable for applications where the top of the hood (blower outlet(s) location) is
accessible after the hood is mounted on the wall and when a Hestan duct cover will be used.
• NOTE: Since Hestan duct covers can be opened for access, they can be installed with the hood
and still permit access to connection points. The duct cover frame requires that the hood and
duct cover be installed together.
Method 2 is suitable for applications where the top of the hood (blower outlet(s) location) is not
accessible after the hood is mounted on the wall.
Make sure that once the hood is mounted the motor cooling vents are
not obstructed.
INSTALLATION
(CONT.)
W
OPTIONAL DUCT COVER
VENT PIPING
FRONT VIEW
FINISHED
COUNTERTOP
VENT PIPING
DUCT
TRANSITION
NON-COMBUSTIBLE OVERHEAD CONSTRUCTION
HESTAN OUTDOOR
VENT HOOD
GVPxx
INSULATION
JACKET AGIJxx
(IF REQUIRED)
SIDE VIEW
NON-COMBUSTIBLE REAR WALL
24
61
MIN.
24
61
MIN.
36
91.4
REF.
30
76.2
30
76.2
18
45.9
HESTAN OUTDOOR
VENT HOOD
GVPxx
5.25 REF.
13.3
6
15.1
6
15.1
NOTES:
“W" IS THE WIDTH OF THE GRILL.
GRILL
WIDTH
RECOMMENDED
VENT HOOD
30" [76.2]
GVP42
36" [91.4]
GVP48
42" [106.7]
GVP54
DIMENSIONS IN [ ] ARE IN CM.
NON-COMBUSTIBLE OVERHEAD CONSTRUCTION
Fig. 1
©2022 Hestan Commercial Corporation
12
EN
Loading ...
Loading ...
Loading ...