Loading ...
Loading ...
Loading ...
Controls and Features
Beverage Center
Interior lighting
and glass
activation
The interior light makes it easy to view
your beverage labels and enhances the
display of your collection. The privacy
glass allows you to view your wine and
beverages with a simple press of a button,
without opening the door. These two
features work jointly to display your
beverages.
Normal operation
When the door is opened, the light will
come on and the door will become clear.
Special features
The light and glass activation button,
located at the top of the handle, will switch
the glass from opaque to clear and will, at
the same time, turn on the light. The light
will stay on and the glass will remain clear
for one hour from the last time the button
was pressed. To turn the light off and make
the glass opaque, press the button again.
The opaque setting conceals the contents
from view.
The light will come on only when the door
is opened or the button is pressed. If you
choose to activate the light and door while
the door is open, you may notice that the
word ON is displayed. If you press the light
button a second time, while the door is
open the word OFF will be displayed.
For best viewing, do not store a bottle
on the top shelf directly under the light.
Remember to turn off the light when it
is no longer needed.
Temperature
control
The operating temperatures of the
beverage center range from 40°F to 65°F.
This appliance is not a refrigerator and
does not maintain temperatures like a
refrigerator (below 40°F).
Do not install the beverage center where
the temperature will go below 55°F or
above 90°F.
As with any refrigeration-type product,
there is a slight temperature variance at
different locations within the cabinet.
The temperature display shows the actual
temperature of the beverage center. The
actual temperature may vary slightly from
the set temperature based on factors such
as door openings, amount of beverages
and room temperature. After making
adjustments, allow 12 to 24 hours for the
beverage center to reach the temperature
you have set and before making any
further adjustments. The factory setting
is 45°F.
To change the temperature settings,
press the + and – pads until you reach
the desired set temperature. After several
seconds, the display will return to the actual
temperature. The actual temperature will be
displayed while the unit moves toward the
set temperature.
Allow 12 to 24 hours for the beverage
center to reach the temperature you have
set and before making any adjustments
to the initial setting.
NOTES:
•This unit is designed for storing and
cooling beverages. It is not intended
for the storage of perishable foods.
•The lowest temperatures are found on
the lower shelves/racks and toward the
rear of the shelves/racks.
8
Child control
lockout
This child control lockout feature prevents
unwanted changes to your temperature
settings.
After the desired temperature is set, the
temperature can be locked. To lock, press
both the + and – pads at the same time for
five seconds. To unlock, press both + and –
pads for five seconds.
Loading ...
Loading ...
Loading ...