Loading ...
Loading ...
Loading ...
6 7
•
ensure they are completely dry before
reusing. Avoid direct sunlight or
extreme drying conditions. Do not
use a hair dryer to dry the filters.
•
aligning it with the dust container
and sitting it in place, then fit the
filter in the frame by aligning the frame
with the dust container and simply
sliding it into place.
•
will allow the dust container to fit
back into the dust container only if
the filter is properly installed. If the dust
container does not fit into the dust
compartment do not force it.
Check the filter is properly installed.
•
do not reuse them.
CHANGING THE EXHAUST FILTER
• Open the grill on the rear cover.
• Take the filter out and replace it with
a new one.
• Put the filter on the grill.
•
How To Store
Your Vacuum
1. Choose a storage location that is
both safe and dry.
2. Depending on the space available,
you can choose to store it in an
upright or horizontal position using
the parking slot.
3. Be careful not to trap, twist or tie the
electrical cord. Wind it.
4. Keep the extension tubes, nozzles
and hose together to avoid
misplacing them.
Disposing Your
Vacuum
PACKAGING MATERIAL
The packaging materials are
environmentally-friendly and can be
recycled. The plastic components are
identified by markings, e.g. >PE<,
>PS<. Please dispose of the packaging
materials in the appropriate container at
a community waste disposal facility.
OLD APPLIANCE
The symbol
on the appliance or its
packaging indicates that this product
may not be treated as household waste.
Instead, it should be handed over to
the applicable collection point for the
recycling of electrical and electronic
equipment.
By ensuring that this product is disposed
of correctly, you can help prevent
potential negative consequences for
the environment and human health.
For more detailed information about
recycling, please contact your local
city council.
• To close the dust container, ensure
the hinge is securely fastened before
you lock the cover.
• Replace the dust container into
the cleaner.
• Always operate the appliance with the
dust container properly installed.
REPLACING AND CLEANING
THE HEPA FILTER
• Filter for air-inlet should be cleaned
at least twice a year or when it
becomes visiblly solid.
• Always operate the cleaner with
filters to avoid reduced suction
or a motor damage.
• Remove the dust container as
described in the previous section.
•
in this vacuum cleaner, a spongy
grey protection filter, and the
framed HEPA filter .
•
surface covered with a sheet
of paper. This will dislodge
excessive residue from the filter.
Dispose of the cover sheet with the
dust residue. Gently beat the grey
protection filter in an open air space
to properly dislodge any dust.
•
grey protection filter can be washed
under a tap with cold water. Always
wash the filter from the underside, do
not scrub of use cleaning agents on
the filter. Do not use a washing
machine to wash the filter.
•
container by pulling on the release
tab on the top right side of the filter
frame. Remove the grey protection
filter by simply pulling it loose from
the container.
MAINTENANCE MAINTENANCE
Loading ...
Loading ...