ISpring RO500AK RO500-BN Tankless RO Reverse Osmosis Water Filtration System, 500 GPD Fast Flow, Brushed Nickel Faucet, 2:1 Pure to Drain Ratio, White

User Manual - Page 17

For RO500AK.

PDF File Manual, 21 pages, Read Online | Download pdf file

RO500AK photo
Loading ...
Loading ...
Loading ...
the rinsing filter for 30 minutes.
5. If the composite filter and the post carbon
filter are simultaneously reset: rinse the RO
MEMBRANE for 5 minutes, then rinse the
filter for 15 minutes.
6 Running Water Normal operation.
While running, the water
quality indicator displays
the water quality status
and is always on.
After 30 seconds, the
water quality indicator
displays the real-time
water quality data and is
always on.
7 Standby
The machine stops operation and enters
standby mode.
Water quality indicator
off.
8 Powering On
While powering on, multiple display
indicators are on at the same time. Each
indicator flashes in the order of status (blue,
purple, red), and each state is illuminated
for 1 second, for a total of 3 seconds.
7) Filter Service Life Reset
To perform a manual reset, press and hold the "Filter Service Life" button for 3 seconds. This
action will be accompanied by a short "Beep" sound as the system enters the filter reset mode.
The filter life indicator will flash once per second and will display the current state. The interval
increases to once per 0.5 seconds for the second time. Press the corresponding "filter service
life" button for 3 seconds to reset the filter. The filter service life indicator light will be lit blue,
and the buzzer will sound once, indicating the reset was successful. (Note: The system will exit
filter reset mode if action is not taken within 10 seconds.)
8) Manual Rinsing Mode
Press and hold the corresponding reset buttons CF+RO+CB for 3 seconds. A short “Beep”
sound will indicate that the system has entered the manual rinsing mode. Next, rinse the RO
MEMBRANE for 5 minutes. After this period, press and hold the corresponding reset buttons
CF+RO+CB for 3 seconds again. Another short “Beep” sound will signal the manual rinsing
mode. If the user runs water while rinsing, the system will automatically exit rinsing mode and
switch to normal mode. (The water quality indicator shows the state before rinsing and flashes
once per second.)
9) External Display Smart Faucet
Please refer to the appropriate instruction manual.
www.123filter.com | (678) 261-7611 | support@123filter.com Page 16
Loading ...
Loading ...
Loading ...