Loading ...
Loading ...
Loading ...
10
INSTALLATION (cont.)
Plugging in the Unit
1. Check the prong and surface of the power cord plug for dust/dirt. If dust and/
or dirt are present, wipe off with a clean, dry cloth.
2. Check the power cord, plug and prong for damage or excess play. If any
damage or excess play is found, contact your MovinCool reseller or a qualified
technician for repair.
WARNING:
1. If the power cord or plug is damaged, repair should only be
performed by qualified electrical personnel.
2. Do not connect/disconnect the power cord or attempt to operate
buttons with wet hands. This could result in electrical shock.
3. Because of potential safety harzards under a certain condition, we
strongly recommend against the use of an extension cord. However,
if you still elect to use an extension cord, it is absolutely necessary
that it is a UL listed, 3-wire grounding type appliance extension cord,
having a 3-blade and a 3-slot receptacle that plugs into the appliance.
The marked rating of the extension cord should be 208/230 V, 30 A for
the Office Pro 36 and 208/230 V, 50 A for the Office Pro 60 or
equivalent.
CAUTION: The power supply should be a dedicated single outlet circuit
with UL recognized short-circuit and ground-fault protective breaker.
Do not share this outlet with any other instrument or equipment. The
power supply outlet rating and the recommended fuse size are shown
below.
Note:
1. Make sure the AC outlet is free of dirt, dust, oil, water or any other foreign
matter.
2. The Office Pro 36 is equipped with UL recognized LCDI power cord and NEMA
plug configuration (6-30). The appropriate outlet must be used for this plug type.
3. The Office Pro 60 is equipped with a power cord and NEMA plug configuration
(6-50). The appropriate outlet must be used for this plug type.
Model Power Supply Outlet Rating Recommended Fuse Size
Office Pro 36 1 Phase, 208/230 V, 60 Hz, 30 A 30 A
Office Pro 60 1 Phase, 208/230 V, 60 Hz, 50 A 50 A
Loading ...
Loading ...
Loading ...