Loading ...
Loading ...
Loading ...
6 720 813 938 (2016/06) OptiFlow Professional
8 | Operation instructions
▶ Press the buttons and until you reach the
desired temperature.
Fig. 5
Selecting the required temperature, reduces the energy and
water consumption.
3.5 Programming button
Setting the water temperature
Fig. 6
▶ Press the buttons and to select the temperature
to be set.
▶ Press the programming button for 3 seconds to set the
temperature.
When the display stops flashing, the temperature is set in the
memory.
Selecting the preset temperature
To select the preset temperature.
▶ Press the programming button for 1 second.
The display shows the temperature previously set and this goes
on to be the selected temperature.
3.6 Draining the appliance
If draining the appliance is required, the following process
should be followed:
▶ Shut off the cold water isolation valve on the cold water
inlet off the appliance.
▶ Open a hot water tap.
▶ Remove the connection to the cold water pipe.
▶ Empty all the water contained inside the appliance.
3.7 Codes of errors in the display
See tab. 4 on page 10.
Resetting the appliance
Some of the possible faults may be solved by resetting the
appliance:
▶ Press the button for 3 seconds.
3.8 Cleaning the front of the appliance
▶ Only clean the front of the appliance with a cloth and some
detergent.
CAUTION:
The temperature indication on the display is
approximate, always confirm with your hand
before bathing children or old people.
6720806146-04.1V
6720806146-05.1V
NOTICE:
Not draining the appliance when a freezing risk
exists may damage components of the
appliance.
The anti-freeze device protects the appliance
against possible risks of freezing.
Power to the appliance must remain on for the
anti-freeze to be active.
Do not use corrosive and/or abrasive
detergents.
Loading ...
Loading ...
Loading ...