Loading ...
4. Installation completed
5. Connect the wire from the solar
panel into the socket located under
the light fixture. Your solar motion
light will now begin to charge.
6. SENSOR HEAD
ADJUSTMENT: After installation,
aim sensor head toward desired
detection area and make sure
sensor head is positioned with
controls facing toward the ground.
3. Slide light fixture back onto the
mounting plate to secure.
1. Use a power drill (not included) to
create the holes on your chosen
mounting surface.
Use 4 of the included anchors and
screws to fasten the solar panel to the
surface.
INSTALLATION AND OPERATION INSTRUCTIONS
INSTALLATION
Gently remove all parts from the package and lay them out on a smooth surface.
IMPORTANT: Ensure your solar panel is placed where it is exposed to optimized sunlight. Be aware of objects such as trees or property
overhangs that may impede the panel’s ability to generate a charge.
Recommended installation height: 6.5 -10 feet above the ground.
At such a height, adjust motion sensor's angle by following illustrations below. The fixture will provide a detection distance of up to 45 feet
(Max) at 77 degrees Fahrenheit.
The sensor will be more sensitive to motion across than motion towards it directly.
2. Use a power drill (not included) to
drill the holes on your chosen
mounting surface.
Place the mounting plate ( with
smooth surface facing out) over the
holes & use 4 of the included anchors
and screws to fasten the mounting
plate to the surface.
FEATURES:
Motion sensor: At night, turns light ON automatically when motion is detected and turns light OFF automatically when motion stops.
• Adjustable motion sensor
• Adjustable time and sensitivity settings
• Solar panel with 15 ft wire
Sensor Range: Up to 13.5 m / 45 ft. x 240 degree spread (Varies with various environment).
Lumens output: 2,200 lumens / 6,000K (Max, full charging).
PREPARATION: Tools required for assembly (not included): Phillips screwdriver, safety goggles, power drill and ladder.
2
Loading ...
Loading ...