Loading ...
Loading ...
Loading ...
4
What’s in the box?
• Instruction manual
• Keys
• Spare parts (hopefully you won’t need these)
I received my wine cabinet, now what?
Your wine cabinet was designed to be built into kitchen or bar cabinets or it will
work just fine as a stand alone appliance. Your choice.
You should place your wine cabinet on a flat, solid floor that is strong enough to
support it when it is fully loaded (300-700 lbs). To level your wine cellar, adjust
the front leveling leg at the bottom of the wine cabinet.
Locate the wine cabinet away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the UV coating on your glass door, extreme
heat or cold will also cause the unit to perform improperly.
Avoid locating the wine cabinet in damp areas.
Plug the wine cabinet into a dedicated (for this appliance only), properly installed
and grounded wall outlet. Do not under any circumstances cut or remove the third
(grounding) prong from the power cord. Any questions concerning power and/or electrical
grounding should be directed to a certified electrician or authorized product service
center.
Handle Installation
Step 1. Line up the screw holes on the
handle with the screws on the front of the
door. The screws will line up perfectly
with the screw holes on the handle,
depending on your door style. It could
be either the upper or lower portion of
the handle.
Step 2. Push the black rubber door
gasket to the side to reveal the screw
on the inside of the door.
Loading ...
Loading ...
Loading ...