Loading ...
Loading ...
2
| P a g e
safety. Children and vulnerable people should be supervised to ensure they do not play with the
appliance.
18. If the supply cord is damaged in any way, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
19. To prevent overheating of this appliance, keep the air inlets and outlets clean and free of
anything that may cause blockage. Check all inlets and outlets from time to time to ensure it is
clear of any dirt or dust accumulation. DO NOT COVER.
20. Parts of the heater may exceed 200℃, contact with the heating tube, reflector, or metal parts
near the heating tube, may cause severe BURNS. To avoid burns, do not let bare skin touch hot
surface.
21. NEVER place hands under the heating elements. ALWAYS allow heating element to cool at
least 10 minutes before touching the heating tube or adjacent parts.
22. This product contains recyclable materials. Do not dispose this product as unsorted municipal
waste. Please contact your local municipality for the nearest collection point.
23. Always plug heater directly into a wall outlet/receptacle. Never use with an extension cord or
relocatable power tap (outlet/power strip).
Introduction
The DR-238 carbon infrared heaters produce instant and comfortable heat like the sun. These
robust and weatherproof heaters are designed for domestic and commercial heating applications
within outdoor areas, it is for outdoor use only.
Model
DR-238
Voltage(V)
110-120V AC
Wattage(W)
1500W
Hertz (Hz)
60
Dimensions W×H×D(in.)
34.6 x 6.27 x 3.33
Weight (lb)
6.5
This heater is for use on 120 volts. The cord has a plug as shown at A in Figure 68.1. An adapter as
shown at C is available for connecting three-blade grounding-type plugs to two-slot receptacles.
The green grounding lug extending from the adapter must be connected to a permanent ground
such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded
receptacle is available.
Loading ...
Loading ...
Loading ...