Loading ...
Loading ...
Loading ...
Page 17
DANGER
Always switch o and disconnect power before replacing the lights. Failure to do so may cause
serious injury. Please be aware that the light bulb may retain heat for a short period of time after
being switched o.
Replacing the Lights
6. Cleaning and Maintenance
Step 1
Remove the lters from the rangehood.
Step 2 (removing light bulb)
Gently push light holder down, turn light bulb
anti-clockwise, pull the light bulb down and
remove it from the light holder.
Step 3 (installing light bulb)
Gently push light holder down. Insert a new light
bulb by lining up the pins of the light bulb with
the larger holes inside the light holder. Once the
pins are in place, turn clockwise to secure the
light bulb.
Step 1
GU10 Light Fitting
Step 2
Step 3
IMPORTANT
Light bulb should sit ush after
being installed. Do not over push
the lamp holder down as it may
cause the light bulb to stick out. If
this has occurred, please remove
light bulb and push the light holder
up and back into place and repeat
step 3.
Loading ...
Loading ...
Loading ...