Loading ...
Loading ...
Loading ...
Control Panel
Cleaning and maintenance
Particular care must be taken with the aluminium filters which must be periodically cleaned (at least every
two months). Remove the grease filters and wash them either by hand using hot soapy water or in the
dishwasher using mild detergent.
Note- some discolouration of the frame may occur.
Caution: Never use abrasive or oil based liquid cleaners.
To clean the stainless steel and glass components of the appliance use mild detergent and warm water. In
areas of high humidity and coastal environments cleaning should be carried out frequently.
LED bulb replacement
1. Switch off the power to the canopy hood and allow the bulb to cool.
2. Use a small bladed screwdriver to pop out the light assembly, taking care not to
damage the surrounding material.
3. Unplug the assembly from the wiring.
4. Plug in the new assembly.
5. Push the light assembly back into place
Optional accessories:
For other accessories, parts and service, please contact your local supplier (Refer to the Warranty
Certificate).
Timer switch
Canopy hood will remain on a low, mid or high speed for 15 minutes to clear away all residual cooking
odours before switching off automatically
Loading ...
Loading ...
Loading ...