Loading ...
Loading ...
Loading ...
36 OPERATION
CAUTION
To avoid damaging the dispenser, do not pull up
on the dispenser to close the dishwasher door.
NOTE
After completion of the wash program, check
whether the detergent was completely washed
out.
Some dishwasher detergent tablets may become
stuck in the dispenser due to their excessive size.
Tablets can be placed onto the base of the wash
tub next to the filter before starting the cycle.
Too much detergent can leave a film on dishes
and in the dishwasher, resulting in poor wash
performance.
If dishwasher detergent tablets are used without
liquid rinse aid, the dishes and dishwasher
interior will have excessive moisture. Select the
Extra Dry option for better drying performance.
Using liquid rinse aid improves drying
performance by allowing water to drain off of
dishes after the final rinse.
Do not use detergent tablets for shorter wash
cycles. The tablet may not dissolve completely,
causing detergent residue on dishes and
inefficient cleaning.
Using a wash booster helps remove spots,
residue, and the white film caused by hard
water. It does not help remove excess detergent
residue.
1 Push the button on the dispenser lid to open
the cover.
2 Add dishwashing detergent to the main wash
compartment until the level is between the
lines marked 15 and 25.
Fill to over the 25 line for hard water or
heavily soiled loads.
Fill to the 15 line for soft water or lightly
soiled loads.
3 Slide the detergent lid closed until it clicks.
4 If a prewash is desired, fill the recessed
prewash compartment area on the lid with
detergent.
Adding Rinse Aid to the Dispenser
The Rinse Aid Refill LED appears in the display
when more rinse aid is needed.
The use of rinse aid is recommended to prevent
water spots on dishes and to enhance drying
performance.
NOTE
Only use liquid rinse aid in the dishwasher.
Do not overfill the rinse aid dispenser.
Wipe off any spilled rinse aid around the
dispenser.
1 Open the rinse aid lid by lifting up the flap.
۱٥
۲٥
Loading ...
Loading ...
Loading ...