Loading ...
Loading ...
Loading ...
BVCL-JJ100-A_20EM1.indd 8 12/3/20 09:48
7. HR and MIN 8. WARMING TIMER
Use to set the clock and desired BREW LATER time.
Adjust how long your warming plate stays warm by pressing the WARMING
TIMER button to select between 4, 3, 2 or 1 hour.
6
PREPARING FOR USE
Clean your coffeemaker before using for the first time.
• W ash the Glass Carafe, Carafe Lid, Brew Basket, Gold Tone Filter and the
Water Filter Holder (please refer to product diagram on page 5) in a
mixture of mild detergent and water. Rinse each with clean water
thoroughly. You can also place them in the dishwasher and wash (top rack
only).
• Immerse the Walter Filter Cartridge in cold tap water for 15 minutes
before use.
• R eplace all the parts and close the lid. Plug the power cord into a
standard electrical outlet.
SETTING THE CLOCK
• The clock will flash on when first powered indicating that the time has
not yet been set.
• P ress the HR / MIN button, until you reach the current time. OK will
appear on the screen to confirm clock is set. Pressing any button before
setting the clock will cause the clock to start keeping time from 12:00 am.
You must set the clock first if you want to use the BREW LATER feature.
BEFORE BREWING COFFEE
• F ill carafe with water (up to the 14 cup line) and pour water into the
Water Reservoir. Then run a brew cycle (with water only, do not add
coffee) by pressing the BREW/OFF button.
• When brewing is complete, turn your coffeemaker off by pressing
BREW/OFF button again.
• D iscard the water in the Glass Carafe and rinse the Glass Carafe, Carafe
Lid, Brew Basket, Gold Tone Filter and Water Filter Holder once the unit
has cooled.
Loading ...
Loading ...
Loading ...