Loading ...
Loading ...
Loading ...
23
Operation
Setting The
Dispenser Lock
Setting The Door
Alarm
Resetting The Filter
Indicator
Activating ICE PLUS
Press the button for the desired function to view and select other settings.
Press and hold the ALARM/LOCK button for three seconds
to lock the dispenser and all of the other control panel
functions.
Press and hold again for 3 seconds to unlock.
The ALARM/LOCK button also controls the door alarm that
sounds three times in 30-second intervals when a
compartment door is left open for more than 60 seconds.
The alarm stops sounding when the door is closed.
Press the ALARM/LOCK button once to activate and
deactivate the door alarm function.
Press and hold the LIGHT/FILTER button for more than 3
seconds to reset the filter indicator after the water filter has
been replaced.
Press the ICE PLUS button once to activate the ICE PLUS
function. The ICE PLUS icon on the display panel will
illuminate when activated. The ICE PLUS function runs the
freezer compartment at the coldest setting for a 24-hour
period to increase icemaking by up to about 20%, and then
turns off automatically.
Setting The Functions
•
Contact your local service center if the alarm continues to sound after the doors are
closed.
NOTE
•
It is recommended that you replace the water filter approximately every 6 months, when
the water filter indicator light reaches 0 or whenever the water or ice cube taste
deteriorates noticeably.
NOTE
•
Press the button again to cancel the ICE PLUS function.
NOTE
ALARM / LOCK
3SECS
ALARM / LOCK
3SECS
LIGHT/FILTER
ICE PLUS
Loading ...
Loading ...
Loading ...