Loading ...
Loading ...
Loading ...
14
4. Using a Phillips screwdriver, remove and set aside the 2 oven
bake burner cover screws located at the rear of the oven.
5. Lift up and remove oven bake burner cover.
6. Remove the 2 oven bake burner screws and set aside.
7. Swing the oven bake burner to the side and lift it off the oven
orifice and set aside.
8. Locate the access panel at the rear of the storage drawer
compartment. Using a ΒΌ" (6 mm) nut driver, unscrew the
2 access panel screws. Remove access panel and set aside
along with the 2 screws.
9. Locate gas pressure regulator at the rear of the storage
drawer compartment.
IMPORTANT: Do not remove the gas pressure regulator.
10. Unscrew the regulator cap and remove the plastic cover.
11. Flip the regulator cap over and replace the plastic cover.
12. Screw the regulator cap securely back into place. Do not
overtighten.
A. Oven bake burner cover
B. Oven bake burner cover screws
A. Oven bake burner screws
B. Oven orifice
A. Access panel screws
A
B
A
B
A
A
A. Plastic cover
B. Regulator cap
A. Natural gas position
B. LP gas position
C. Plastic cover
2
A
B
A
B
C
Loading ...
Loading ...
Loading ...