Loading ...
Loading ...
Loading ...
LOCATION OF PARTS
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Install the handle on the door. (See page 8.)
INSTALLATION OF YOUR APPLIANCE
The appliance is designed for built-in, recessed or free-standing installation.
WARNING: Do not store or install the appliance outdoors.
CAUTION
: This appliance is designed for storing and cooling wines. Do not store perishable food,
medicine or other medical products.
Place your Wine Cellar on a floor that is strong enough to support it when it is fully loaded. To level the
unit, adjust the front leveling legs.
For free-standing installation, leave 5 inches (127mm) of space around the back and sides of the unit
to allow proper air circulation to cool the compressor and condenser. Even for built-in installation, you
5
Loading ...
Loading ...
Loading ...