Loading ...
Loading ...
Loading ...
12 13
ASSEMBLY INSTRUCTIONS
STEP 15
Ensure cylinder valve is in its full ‘CLOSE’ position.
Check for any damage to either the cylinder connection
or the hose. NEVER attempt to use damaged
equipment. Attach the regulator and hose to your gas
cylinder. Tighten the nut to a positive stop by hand.
STEP 16
Turn on the gas cylinder ensuring that the control knob
on the smoker is turned OFF at this point.
DO NOT ATTEMPT TO LIGHT THE SMOKER!!.
STEP 17
Use a solution of soapy water (dishwashing liquid and
water is fine). Brush it on or use a spray bottle as
shown in the drawing. Ensure the connections have a
good coating.
STEP 18a
If the connection is leaking, bubbles will start to grow
in the soapy solution. If this happens shut off the gas
supply at the cylinder.
STEP 18b
Tighten the connections using a crescent then repeat
steps 16-17.
STEP 18c
The connection is gas tight when no bubbles grow
around the gas connection.
ASSEMBLY INSTRUCTIONS
Loading ...
Loading ...
Loading ...