Loading ...
Loading ...
Loading ...
m
Door Removal and Reversal Instructions
ToolsNecessary:
Phllll_= necla
or
Quodrex neoo
scmwanver
WnenCh
PUffy
Knife
Adjustable
Wrer,ch
Y
Screw; - Top Hinge
Cowr
i
Cabinet Hole _ Top Hinge
Plugs ,_
Hinge Hole Handle Hole
Plug Plug
Door
Screw_ Stop
Washer
Hinge
Pin
Center
Hinge
Hinge Hole
Plug Handle
Hole
i lugs
DoorStop Door
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTE: If you have stainless steel doors -- go to the Removing Stainless
Steel Doors and Handles Section on page 9.
NOTE: The direction inwhich your refrigerator doors open (door swing)
can be reversed, from left to right or right to left, by moving the door
qinges from one side to the other. Reversing the door swing should be
0erformed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "0" and remove the electrical power cord from the wall outlet. Remove
any food from door shelves.
1 Remove toe grille and top hinge cover.
2. Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing nside screw and
loosening two outside screws enough to allow hinge and shim to
slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove
inside screw and nstal] center hinge.
7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside screws
in holes and tighten. Inside screw will go to opposite side in step 8.
8. Remove two outside screws on opposite side of refrigerator and install
bottom hinge. Insert and tigh[en screw saved from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin
to other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles _see instructionson next page).
11. Move freezer and refrigerator door stops to opposite side. Before
starting screws, use an aw_to puncture the foam
12. Position refrigerator door onto bottom hinge pin and screw center
hinge pin through center hinge intotop of door. Close refrigerator door
to help align hinge hole
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center h=ngep_n.
16. Close freezer door. Have an assistant lift up on opposite side of door
while tightening screws to installtop hinge.
17. Replace toe grille and top hinge cover.
18. Plug in electrical power cord and turn refrigerator _emperature control
to center position. Adjust setting as necessary.
6
Loading ...
Loading ...
Loading ...