Loading ...
Loading ...
Loading ...
Setting Oven Controls
Changing Between Continuous Bake Setting or 12 Hour
Energy Saving
The oven control has a factory preset built-in 12 Hour Energy
Saving feature that will turn off the oven if the oven is left on for
more than 12 hours. The control may be programmed to
override this feature to bake continuously.
To change between continuous bake or 12 Hour Energy Saving
feature:
1. Press and hold Timer Set/Off for 6 seconds
2. Press Self Clean to toggle between 12 Hour OFF or Stay On
(Figure 16) feature.
3. Press STARTto accept choice.
Figure 16:12 hr energy saving (L) and continuous setting (R)
Changing Oven Temperature Display
The oven control is preset for temperatures in °F (Fahrenheit)
when shipped from the factory. The control can be changed to
display either Fahrenheit or Celsius.
To change the display to F (Fahrenheit) or C (Celsius):
1. Press and hold Broil for 6 seconds.
2. Once F (or C) appears in the display, press Self Clean to
toggle between Fahrenheit and Celsius temperature display
modes.
3. Press to accept choice.
START
Important note:
The oven temperature display cannot be changed during the
cooking process or if a Delay Start has been set or Self Clean is
active.
Figure 17: Display showing Fahrenheit and Celsius
Selling Oven Controls Lockout
The control may be programmed to lock the oven door and lock
the oven control keys.
To activate the oven lockout features:
1. Be sure oven door is completely closed.
2. Press and hold Oven Lockout for 3 seconds, door Loc will
appear in the display (Figure 18). The motor driven door
latch mechanism will begin locking the oven door automati-
cally. Do not open the oven door. Allow about 15 seconds
for the oven door to completely lock. Once door is locked,
Loc will appear in the display.
Figure 18: Display showing door locking and in locked position
To cancel the oven lockout feature:
1. Press and hold Oven Lockout for 3 seconds. The motor door
latch will begin unlocking the oven door automatically. Do
not open the oven door. Allow about 15 seconds for the
oven door to completely unlock.
2. When the Loc message no longer displays, the oven door
may be opened and the oven control keys will be available
for use.
Important note:
• To avoid damage to the oven door latching mechanism, do
not attempt to open or close the oven door whenever the
door Loc message is displayed.
• If a control key is pressed when oven lockout is active, the
control will triple beep indicating the key action is not
available when the oven lockout feature is active.
Operating Oven Lights
The interior oven lights will automatically turn on when the oven
door is opened.
Press ()- to turn the interior oven lights on and off whenever
the oven door is closed.
The interior oven lights are located on the rear wall of the oven
interior and are covered with a glass shield. The glass shield
protects the bulb from high temperatures and should always be
in place whenever the oven is in use.
Note: The oven light will not operate during a self clean cycle.
To replace the interior oven light, see "Replacing the oven light"
on page 32.
16
Loading ...
Loading ...
Loading ...