Loading ...
Loading ...
The fans are in-line mixed type fans designed for
extract ventilation of rooms heated in winter time.
Delivery set includes:
1. Fan - 1;
2. Screws with plugs - 4;
3. User’s manual;
4. Packing box.
45
6
VENTS TT SILENT
“0”– turned off, the fan is not operating;
VENTS TT SILENT S
VENTS TT SILENT U U U
VENTS TT SILENT Un U n, U n
VENTS TT P
in-line
Fans
are made of white plastic.
Fans are compatible with ” (100 mm), ” (125 mm),
” (150 mm) diameter ducts.
- ÕÕÕ - the basic fan model, equipped
with an integrated speed switch and a power cord
with a plug. It is provided with the following operation
modes (see fig. 4):
“I” – the fan is operating at minimum speed;
“II” – the fan is operating at maximum speed.
- ÕÕÕ - the fan is equipped with a
high-powered motor;
- ÕÕÕ ( 1, 2) - the fan is equipped
with an integrated speed controller with electronic thermostat,
built into the fan's duct temperature sensor, and power cord
with plug (fig. 5);
- ÕÕÕ ( 1 2 ) - the fan is equipped
with an integrated speed controller with electronic thermostat,
remote temperature sensor fixed on 13 feet cable, and power
cord with plug (fig. 5);
- ÕÕÕ - the fan is equipped with an integrated
smooth speed controller and power cord with plug (fig. 6).
Fans may be mounted either vertically or horizontally
(fig. 1). Fans may be used either separately or as part of
a set for parallel or mounting (fig. 2). Parts that
come with connecting units are delivered separately.
An air duct at least 40 inches (1 meter) long should be
connected to an inlet flange in case of horizontal fan
mounting; a canopy should be installed on an inlet flange
in case of vertical mounting. Outlet flange should always
be connected to an air duct. M unting is
7-16. Air motion must coincide with direction of i
ndicator on the fan case.
Input: 120V AC 60Hz. Scheme of fan connection to the
power network is shown on Fig. 3. Fans are designed for
continuous operation without disconnection from network.
Protection rating from access to dangerous parts and
water penetration is Fans can be operated at
ambien temperatures between and
o shown on
Fig.
IPX4.
t +37°F +107°F
(for the details, please, see the manufacturer's catalog).
Fan surfaces need to be cleaned
(Fig. 1 - ).
of dirt and dust
regularly by using a soft, wet cloth and mild detergent
722
Do not allow liquids to come in contact with the
electric motor. Wipe surfaces dry after cleaning.
Fan construction is constantly being improved, that is
why some models can differ slightly from those described
in this manual models.
Recycle at the end of unit's
service l
Do not dispose of with other trash.
ife.
Loading ...
Loading ...
Loading ...