Loading ...
Loading ...
Loading ...
Installation
B_ ill - h_ R_-75"ig'+,ra_or,s
INSTALLATION REQUIREMENTS
IMPORTANT...Please Read Carefully.
R@iger_tor Do not install refrigerator where
temperature will be below 60 °F (16oC)
because it will not run often enough to
maintah_ proper temperatures,
Do install it on a floor strong enough to
support a fully loaded refrigerator.
If the refiigerator is to be installed in a
corner, allow 2" between the hinges of the
refiigerator and the wall to ensure a 90 °
door opening capabili V.
N+) other clearaDces at top, sides, or ba(k
are required.
L_Jding This model has 4-point leveling. All 4
+orners are supported by leveling legs.
The fiont wheels are non-adjustable; they
are only used fbr positioning the unit.
• To level the back of the unit, turn hex
nut located above the fiont wheels.
° To level the fiont of the trait,
use a 1V," open end wrench and
adjust the leveling legs.
• Turn hex nut or fl-ont leveling
leg ( bckwise to raise the unit,
( ounter-do( kwise to lower
the unit.
See the ]Installation ]Instructions
(Pub° No. 49-1;473-36), (Pub. No, 49-
1_462-42), (Pub. No. 49-6457-48) fi_r
Hex nut
Leveling leg
2O
Loading ...
Loading ...
Loading ...