Loading ...
Loading ...
Loading ...
TemperatureControls
adjust the control as indicated in the Temperature
Control Guide below.
• The first touch of the _+_//_ or _-_/V pads
shows the current temperature setting.
• The display will show the new setting for
approximately three seconds, and then return to the
actual temperature currently within that
compartment.
• Do not change either control more than one degree
at a time. Allow temperature to stabilize for 24 hours
before making a new temperature adjustment.
Temperature Control Guide
Refrigerator too
cold
Refrigerator too
wa rm
Freezer too cold
Freezer too warm
Turn refrigerator
OFF
Set the Refrigerator control
to next higher number by
pressing the _/A pad.
Set the Refrigerator control
to next lower number by
pressing the _ / V pad.
Set the Freezer control to
next higher number by
pressing the _/A pad.
Set the Freezer control to
next lower number by
pressing the _-_/_ pad.
Press the Freezer _+_/A
pad until OFF appears in the
display. Press either the
Freezer or Refrigerator
_::_/_ pad to turn back on.
rated has passed through the filter OR 11 months have
elapsed since the filter has been installed.
The red Replace light will illuminate when the rated
volume of water has passed through the filter OR 12
months have elapsed since the filter was installed. A
new filter should be installed immediately when the
Replace light is illuminated.
After replacing the filter, press and hold the Reset
Filter pad for three seconds. The Order and Replace
lights will go off.
Vacation Mode (_
The Vacation Mode feature causes the freezer
to defrost less frequently, conserving energy. The
Vacation Mode indicator light will illuminate when the
feature is activated. To deactivate, press the Vacation
Mode pad again OR open either door. The indicator
light will go off.
Notes:
• Door openings will not deactivate Vacation Mode
for approximately one hour after activation.
• If vacationing for more than a few days, see the
Preparing for Vacation section, page 22.
Temp Alarm
The Temp Alarm system will alert you if the
freezer or fresh food temperatures exceed
normal operating temperatures due to a power outage
or other event. When activated, the Temp Alarm light
will illuminate.
Speed Ice
When activated, Speed Ice reduces the
freezer temperature to the optimum setting
for 24 hours in order to produce more ice. Important:
When the Speed Ice feature is in operation, the _+_/A
and _/_7 pads for the Freezer control will not
operate.
Reset Filter (select models) _(F_-_
When a water filter has been installed in the
refrigerator, the yellow Order light will illuminate when
90 percent of the volume of water for which the filter is
If the freezer or fresh food temperatures have
exceeded these limits, the display will alternately show
the current compartment temperatures and the
highest compartment temperatures reached when the
power was out. An audible alarm will sound
repeatedly.
Press the Temp Alarm pad once to stop the audible
alarm. The Temp Alarm light will continue to flash and
the temperatures will alternate until the temperatures
have stabilized.
To turn off Temp Alarm, press and hold the Temp
Alarm pad for three seconds. The indicator light will
go off.
Loading ...
Loading ...
Loading ...