Loading ...
Loading ...
Loading ...
5
Bullet Ice Maker
HOW TO USE
Add potable water into water reservoir, note not to exceed the ‘MAX’ line.
Wait for approx. 7 minutes to enjoy fresh ice.
Put the ice basket back and close the lid.
Open the transparent lid and remove the ice basket.
Press the ‘On/Off’ button and wait. Check if the ‘Making’ indicator is glowing green.
Plug into a 120V/60Hz wall outlet, check if the ‘Making’ indicator is flashing.
Ensure the drain plug at the botton of the unit is firmly inserted.
②
④
⑥
⑦
①
③
⑤
Ice Making
②
④
⑥
⑦
⑧
⑨
⑩
①
③
⑤
Remove all of the ice.
Refill the water reservoir with water, run self-cleaning program again.
Repeat step 5 and 6 until the solution inside the unit is fully removed.
Obtain pre-mixed scale remover solution or mix a solution of scale remover
with water according to solution direction. Approx 16 fl.oz. Solution is needed
to complete the cleaning.
Do not use organic solvent, boiled water, detergent, strong acid or strong alkali
etc. for cleaning.
Clean the exterior of the unit with damp soft sponge.
Clean water reservoir, ice basket and ice scoop. This should be carried out
on regular basis.
Empty the unit via the drain plug at the bottom of the unit and insert it back
afterwards.
Fill the water reservoir with scale remover solution and close the lid. Press
the ‘select’ button for 'clean' indicator and then turn on the unit. The solution
will run inside the machine through all the way that water goes when
making ice, to remove the water scale. You may run the program twice for
deep clean.
The self-clean program ends in 5 minutes, then empty the unit via step 2.
Cleaning
Loading ...
Loading ...
Loading ...