9/2014 P/N 803082
RAM ASSOCIATES LLC • P.O. Box 3303 • Nashua, NH 03061
For further questions or assistance please call (866) 218-8473.
Monday - Friday 8am to 5pm Pacific Standard Time
Installation Quick Start Guide for AQT-F2
Important Installation Instructions
WARNING
A newly-installed water filter cartridge may cause water to spurt from the dispenser until
all the air is removed. Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the system.
Protect from freezing.
To reduce the risk of property damage due to water leakage, this filter MUST be
installed in accordance with the manufacturer’s specifications and instructions. This filter
must be replaced every 6 months, at the rated capacity, or sooner if reduced water flow
occurs. Failure to follow instructions and operation specifications will void your warranty.
Further, manufacturer assumes no responsibility or liability for damages arising out of
misuse of the product. The filter bypass plug MUST be used when a filter replacement
cartridge is not installed.
The risk associated with small parts can cause choking if swallowed. Keep children
away from small parts during the replacement of the water filter.
1
Remove old filter by unscrewing
housing. Insert the new element
into the housing as described in
the user manual which
accompanied the refrigerator at
the time of purchase.
2
Condition the filtering system
by running water through the
dispenser for 3 minutes before
using.
3
Reset the "replace filter" light.
Refer to your refrigerator
owner's manual for reset
procedure.
4
Attach the included water filter
replacement calendar label
according to the label
instructions.
