Loading ...
Loading ...
Loading ...
6 Operation
6.1 Preparing the appliance
An appliance with a heat pump can only be operated after standing in
the normal operating position for around 2 hours.
Opening the appliance door
▸Pull the door handle forwards.
– Any programme that is running will be automatic-
ally interrupted.
Before using for the first time
▸Switch the power on.
▸Turn on the water tap.
▸Fill the salt reservoir with approximately 1.0l water and 1kg regeneration
salt.
For hygiene reasons, regeneration salt is also recommended for use with
low water hardness and
detergents.
▸Wipe away excess salt on the edge of the salt reservoir.
▸Fill the rinse agent reservoir with rinse agent.
▸Run the
programme without dishes to protect the appliance from corro-
sion from any excess salt and to remove factory-related grease deposits.
On initial use, the refill indicator can remain illuminated for several
wash cycles.
goes out when the salt concentration in the reservoir is evenly dis-
tributed (after about 10 wash cycles).
29
Loading ...
Loading ...
Loading ...